Because PS Admin is a legacy utility, installing it on modern operating systems requires a few specific steps. Step 1: Download the Software
When prompted for additional port information, choose and click Settings . Set the protocol to LPR .
Locate the physical pinhole button on the back or side of the D-Link print server. Unplug the power cable from the device. Press and hold the Reset button using a paperclip. dlink ps admin
Input your network's (usually 255.255.255.0 ) and Gateway (your router's IP).
The software will automatically scan the network. Your print server should appear in the main device list, displaying its default MAC address and device name (e.g., DP-300U ). Changing the Default IP Address Because PS Admin is a legacy utility, installing
Check the physical link lights on both the print server and your router. If there is no light, try swapping the Ethernet cable.
ERROR: AUTH REQUIRED.
This comprehensive guide covers everything you need to know about using D-Link PS Admin, from initial setup to resolving common connectivity issues. What is D-Link PS Admin?
Once PS Admin discovers your print server, you can begin the configuration process. Finding the Print Server Locate the physical pinhole button on the back