Press . Review the Levey-Jennings charts for any shifts, trends, or violations of Westgard rules. Step 3: Sample Analysis The XN-2000 supports multiple analysis modes:
The system utilizes three primary core technologies to analyze blood cells:
While sites like ManualsLib or Scribd sometimes host old versions, beware. These versions are often outdated (e.g., from firmware 1.0, while your lab runs firmware 4.2). Using an obsolete manual can lead to incorrect procedures.
Verify the Pneumatic Unit is running and the pressure gauges show (Pressure) and Check the rear fluidic lines for kinks or tight bends. Empty the condensation trap chamber if fluid is present. Error: "Reagent Temperature Error" The laboratory ambient temperature is outside the Sysmex Xn-2000 User Manual Pdf
Mix the XN-CHECK vial gently by inversion, place it in the designated QC rack, and initiate the automated sampler run.
This is the high-throughput standard mode. Racks containing up to 10 tubes are placed on the right-hand loading conveyor. The system automatically advances the tubes, reads the barcodes, mixes the blood via inversion, and pierces the tube cap to aspirate the sample. Manual Mode (Open or Micro Tubes)
In most XN-2000 installations, Sysmex provides a branded USB flash drive attached to the back of the computer monitor or inside the service panel. This drive contains the full PDF manual in multiple languages (usually English, German, French, Spanish, and Japanese). These versions are often outdated (e
The optical bench internal temperature exceeds operational limits.
counts, improving accuracy for sensitive patient populations. Enhanced Platelet Counting
If erratic counts or flags appear, use the IPU maintenance menu to execute a "Flush Air Bubbles" routine to clear the fluidic lines. Empty the condensation trap chamber if fluid is present
hematology analyzer, based on its standard instruction for use and operator's manual. Core System Overview The XN-2000 is a co-primary system consisting of two analysis modules
Adds reticulocyte counts and advanced reticulocyte parameters (IRF, RET-He).
The is an automated hematology analyzer system that integrates two analysis modules (typically XN-10 or XN-20 units) with a shared sampler to increase throughput for medium-sized laboratories. Official user manuals for this device generally cover installation, daily operation, maintenance, and technical specifications. Core Content Areas of the XN-2000 Manual XN-2000™ Hematology Analyzer | Sysmex America